Business Owners Hub
Performance Bond · Bank Guarantee · Surety Bond
A cash bond, a bank guarantee and a surety bond do the same job for the principal and very different jobs to your cash. One sits in someone else's account, one eats into your bank limits, and one leans on an insurer and your indemnity. Here is how to choose the one that leaves you room to keep trading.
Quick Answer
A cash bond, a bank guarantee and a surety bond all promise the principal it gets paid if you do not perform, but cash ties up every dollar, a bank guarantee uses your bank limits, and a surety bond usually ties up the least. Which one you can offer is set by the contract, and each changes how much room is left for business loans and other borrowing. The table below compares all three; how lenders approve bonds is covered in our guide to performance bonds for civil contractors.
Also called: cash bond, cash security deposit, security deposit. Retention money held back from each progress payment is related but different: the principal keeps part of what it owes you, rather than you handing over cash up front.
What is a cash backed performance bond?
A cash backed performance bond is cash you hand to the principal, or place in an account it controls, as security that you will finish the work and fix defects. It is the simplest form of cash security: no bank, no insurer, just your money held against your promise to perform.
The contract sets the amount, usually as a share of the contract sum, and says when the principal can use it and when it comes back. Until then the money is out of your working capital, even though it still shows as yours on the balance sheet. Many owners in the Business Owners Hub first meet cash security on a fit-out, a maintenance contract or a first job for a larger builder.
It is not the same as retention money. Retentions are held back from each progress claim as the job runs, so you never receive that part of the payment until release. Cash security is paid out by you, often before work starts. Some contracts ask for both, which is why it pays to check how each claim is verified and paid, covered in our post on progress claim verification for subcontractors.
How is a bank guarantee for a contractor secured?
A bank guarantee for a contractor is secured by something the bank can fall back on if the principal calls it: cash in a term deposit, property, or a share of a wider facility the bank has already approved. The bank promises to pay the principal on demand up to the guarantee amount, then looks to you to repay it.
- Cash cover. The most common route for smaller businesses. You place cash in a term deposit with the bank and it issues the guarantee against it. Bank guarantees for small contractors are often fully cash backed (varies by lender), so the cash is tied up much as it would be with a cash bond, though it may earn some interest.
- Property. Where the bank holds a mortgage over business or residential property, the guarantee can sit against that security instead of cash. If the property belongs to a family member, the issues in our post on someone else's property as security apply.
- A facility limit. Larger contractors may have a guarantee or contingent liability limit inside their banking facilities, assessed like a loan.
Either way the bank charges an establishment fee and an ongoing fee, typically a percentage of the guarantee amount each year, and the rate varies by lender and by the security behind it. What a lender checks before it will issue bonds at all, including the paperwork it wants, is set out in our civil contractor bonds guide, so it is not repeated here.
What is a surety bond, and how is it different from a bank guarantee?
A surety bond is a guarantee of your performance issued by an insurer or surety provider rather than a bank, and the main difference is what stands behind it: an indemnity from your business instead of cash or property held by a bank. If the principal calls the bond, the insurer pays and then recovers that amount from you under the indemnity.
Because the insurer relies on your financial strength and your indemnity, it usually does not ask for a term deposit, and it does not use your bank limits. In exchange it assesses your accounts, your work history and your net assets, and it often asks your directors to sign the indemnity personally, which works much like a director's guarantee. You pay a premium, typically a percentage of the bond amount, which varies by provider and your financials.
The same instrument can cover different stages of a contract. Export Finance Australia's explainer on bonds describes bid bonds that hold you to your tender, advance payment bonds that protect a client's prepayment, performance bonds that guarantee you will complete the work, and warranty bonds that cover the defects period. It also notes that a bank may want cash reserves or other assets as security before it issues a bond, which is the gap a surety bond is built to fill.
Conditional or unconditional: when can the principal call on your security?
Whether your security is conditional or unconditional decides when the principal can call on it: an unconditional bank guarantee or bond is paid on demand, without the principal proving you breached the contract, while a conditional one needs a breach or a loss to be shown first. That single word often matters more than which form of security you give.
What does an unconditional guarantee mean for a contractor?
Most construction and services contracts ask for unconditional security, because it gives the principal fast access to money while a dispute is argued out. The bank or insurer pays on a written demand and does not decide who is right. With cash security the position is similar: the principal already holds the money. Your protection sits in the contract itself, which usually says when the principal may call on security and whether it must give you notice first.
What does conditional security change?
Conditional security is more common in surety bonds and less common in bank guarantees. It is friendlier to the contractor, since the principal must prove its loss, but some principals will not accept it at all. If you are offered the choice, take the contract wording to your solicitor before you sign, and price the job knowing which one you have.
Cash bond, bank guarantee or surety bond: which ties up the least cash?
A surety bond usually leaves the least cash tied up, a bank guarantee secured by property comes next, and a cash bond or a fully cash backed guarantee ties up every dollar of the security amount. The right choice still depends on what the contract accepts and what your balance sheet can support.
| Factor | Cash bond | Bank guarantee | Surety bond |
|---|---|---|---|
| Who provides it | You, paid to the principal or held in an agreed account | Your bank, under a facility | An insurer or surety provider |
| What it ties up | Every dollar of the security amount until release | Cash in a term deposit, property, or part of a facility limit; often fully cash backed (varies by lender) | Usually no cash; you, and often your directors, sign an indemnity |
| Effect on other borrowing | Cash is gone from working capital | Counts against your facility headroom | Bank limits usually untouched; the indemnity is still disclosed to lenders |
| Cost | No fee, but you lose the use of the cash | Establishment and ongoing fees, typically a percentage of the amount (varies by lender) | A premium, typically a percentage of the bond (varies by provider) |
| Who accepts it | Most principals, where the contract allows cash | Almost all principals, including most government contracts | Only where the contract or tender allows insurance bonds |
| How it comes back | Repaid by the principal as the contract sets out | Cancelled by the bank when the original is returned | Discharged by the insurer when the principal releases it |
| Usually suits | Small contracts with short defects periods | Owners with property or an established bank facility | Contractors with solid accounts who need cash to grow |
Lighter on your cash
- A surety bond, where the contract accepts one
- A bank guarantee against property the bank already holds
- Security reduced at practical completion, in writing
- Cash swapped for a guarantee or bond at a contract variation
Heavier on your cash
- Cash security on several jobs at the same time
- A guarantee backed by a term deposit you also need for wages
- Security still held after the defects period ends
- Offering more security than the contract asks for
In deals I've seen, the cost that hurts is rarely the bank fee or the premium. It is the cash sitting in three or four places at once as jobs overlap, so the option with the least cash tied up is often worth paying a little more for if it keeps wages and materials covered.
Select your scenario
Lead with a surety bond, if the contract allows it
A surety bond usually leaves the least cash tied up because no term deposit or bank limit is used. Check the security clause first, then ask a surety provider whether your accounts meet its tests.
Least cash tied upUse a bank guarantee inside your existing limits
If your bank already holds property or a wider facility, a guarantee can sit against that security instead of new cash. It still uses facility headroom, so size it before you bid on the next job.
Uses facility headroomCash may be simplest, if the amount is small
For a small contract with a short defects period, cash security can be faster than arranging a guarantee or bond. Diary the release dates and ask for the money back in writing.
Simplest, most cashWill principals and government tenders accept a surety bond instead?
Many principals and government tenders will accept a surety bond instead of a bank guarantee, but only where the contract or tender wording allows it, so the security clause decides, not your preference. Some contracts define acceptable security narrowly as an unconditional guarantee from a bank. Others allow an insurance bond from an insurer that meets a stated financial strength test.
- Read the definition. Look for how the contract defines "security", "approved security" or "financial institution". That definition tells you whether an insurer counts.
- Ask before you tender. If a tender is silent, ask in writing whether a surety bond is acceptable. Head contractors on larger jobs, including many in the Construction Hub, will often say yes for a subcontractor with sound accounts.
- Check the form. Some principals require their own form of wording. A bond that does not match it can be rejected even if the issuer is acceptable.
How can a contractor free up cash tied up in contract security?
A contractor can free up cash tied up in security by swapping cash for a guarantee or bond where the contract allows it, asking for the agreed reduction at practical completion, and making sure the balance is released at the end of the defects period (varies by contract). Most of the cash that stays stuck is stuck because nobody asked for it back.
- List every piece of security you have given. Job, principal, amount, form, and the release dates in each contract.
- Swap where you can. At a variation, a renewal or a new contract with the same principal, ask whether a surety bond or guarantee can replace cash.
- Claim the reduction at practical completion. Many contracts reduce security at that point. Ask in writing with the completion certificate attached.
- Diary the end of the defects period. Ask for the balance and for the original guarantee or bond to be returned so your bank or insurer can cancel it.
- Stop paying for released security. Until the original is returned, the bank fee or premium usually keeps running.
In practice, owners in the Tradie Hub who run several jobs at once find a simple security register frees more cash than any new facility. Deposit bonds used by property buyers in place of a cash deposit are a different product and are not covered here. For how security fits with progress claims, retentions and equipment finance across a whole business, see the civil contractor funding stack.
How does contract security affect your other borrowing?
Contract security affects your other borrowing because every bank guarantee counts against your facility headroom, and cash held as security is no longer available to service debt or fund the next job. A lender will ask about all three forms when you apply for business loans or a line of credit.
- Bank guarantees. A guarantee is treated as a contingent liability. It uses part of your approved limits, so a large guarantee can leave less room for an overdraft or a business line of credit.
- Cash security. It is still your asset, but it is not liquid. Lenders look at the cash you can actually use when they assess serviceability.
- Surety indemnities. They usually sit outside your bank limits, but a lender will want to know they exist, and personal indemnities from directors may be weighed when the same directors apply for personal credit.
The smoothest applications we see come with a short schedule of every guarantee, bond and cash deposit on issue, with release dates. It answers the lender's question before it is asked. How business loans work more broadly, including security and cost, is covered in our business loans guide.
A cash bond, a bank guarantee and a surety bond all give the principal the same comfort, but they cost your business in different ways. Cash ties up every dollar. A bank guarantee is often fully cash backed for smaller businesses and always uses facility headroom. A surety bond usually ties up the least cash, in exchange for a premium and an indemnity, and only works where the contract accepts it. Check whether your security is conditional or unconditional, keep a register of what you have given, and ask for it back on time.
Key takeaway: read the security clause first, then offer the form that leaves the least cash tied up and still meets the contract.Frequently Asked Questions
A cash backed performance bond works by you paying cash to the principal, or into an account it controls, as security that you will finish the job and fix defects. If you do not perform, the principal can use that cash as the contract allows. The rest is returned in stages, often part at practical completion and the balance at the end of the defects period, as set out in your contract and tracked against your progress claims.
A principal can usually call an unconditional bank guarantee without first proving a breach, because the bank pays on demand and does not look into the dispute. What the principal may do under the contract is a separate question, and a contractor can sometimes act quickly to stop a call that the contract does not permit. That is a question for your solicitor, and it is the reason the security clause matters as much as the form of security.
In Australia a performance bond is usually issued by a bank, as a bank guarantee, or by an insurer or surety provider, as a surety or insurance bond. Some principals accept cash instead. Which issuers count is set by the contract or tender, so check the security clause before you approach a bank or a surety provider, as a subcontractor or a head contractor.
A surety bond is often cheaper than a bank guarantee in cash terms, because it usually needs no term deposit or property behind it, although the premium itself varies by provider and your financials. The trade off is an indemnity from your business, and often from your directors, so read up on director's guarantees before you sign one. The cheapest option on paper is not always accepted by the principal.
You get your cash security back when the contract says so, which is often part at practical completion and the remainder released at the end of the defects period (varies by contract). Release is rarely automatic, so diary the dates and ask for it in writing. If the principal holds it longer, that is a question for your solicitor, and it is worth keeping it in mind when you plan your working capital or a business line of credit.