Break Costs on a Fixed Rate Commercial Property Loan, Explained

Break Costs on a Fixed Rate Commercial Property Loan, Explained

What a break cost is on a fixed rate commercial property loan, how it is worked out, which protections apply and when paying it to refinance is worth it.

Break Costs on a Commercial Loan | Switchboard Finance
Switchboard Finance Property Lending Hub

Break Costs · Fixed Rate · Commercial Property

Break Costs on a Fixed Rate Commercial Property Loan, Explained

Most of what people know about break costs comes from home loans, and those protections do not carry over to a commercial loan. Here is how the charge works on a fixed rate commercial property loan, what your contract decides, and how to tell whether to pay it or wait.

Published 19 November 2026 / Reviewed 19 November 2026 / Nick Lim, FBAA Accredited Finance Broker / General information only

Quick Answer

A break cost is what a lender charges when a fixed rate commercial loan is repaid, refinanced or restructured before the fixed period ends, and it is meant to recover the lender's loss when wholesale rates have fallen since the rate was fixed. On a commercial property loan the amount turns on what the contract allows, so the practical steps are to ask for the quote in writing and then work out the months to break even against the months left on the fixed rate.

Also called: economic cost, early repayment adjustment, prepayment fee. Lenders use different names for the same charge; a discharge fee and a deferred establishment fee are separate charges.

What is a break cost on a commercial property loan?

A break cost on a commercial property loan is the charge a lender makes when a fixed rate ends before the fixed period runs out. Most owners first meet the idea on a home loan, and that is where the misconception starts: the rules people half remember from a home loan do not carry over to a commercial one. That gap gets its own section below.

The charge can apply whenever the fixed rate is cut short. That includes repaying the loan in full, refinancing to another lender, selling the property, making a large lump sum repayment, or restructuring the loan with the same lender. Each of those is a form of early termination of the fixed rate, even where the loan itself carries on. A term loan on a variable rate can typically be repaid without one, although other exit fees may still apply.

The idea behind it is the lender's loss, not a penalty. When you fixed, the lender typically arranged its own funding for the same period at the wholesale rate of that day. If you leave early and wholesale rates are now lower, the lender has to lend your money out again at less than it is paying for it. The break cost is the lender's estimate of that gap for the time that was left.

This post covers loans secured on commercial property. For a business loan that is not secured on property, the break cost paragraph in our business loan refinance post is the place to start, and the question of whether to fix at all sits with our commercial property loan rates post.

How are break costs calculated on a fixed rate commercial loan?

Break costs on a fixed rate commercial loan are calculated from the gap between wholesale rates on the day you fixed and wholesale rates on the day you break, applied to the amount you repay for the time left on the fixed rate. Every lender words its own formula, but the moving parts are usually the same four.

  • The rate gap. The wholesale rate for your fixed term on the day you fixed, compared with the wholesale rate today for the time that is left. The wider the fall, the larger the charge.
  • The amount repaid early. A full payout is measured on the whole balance. A partial repayment is measured on the part repaid.
  • The time left. Three years remaining costs more than three months remaining on the same rate gap.
  • Present value. The lender receives the money today, not spread over the remaining term, so the total is discounted back to today's dollars.

The dispute body's own factsheet describes much the same test when it checks a figure: a comparison of wholesale swap rates at the start and at prepayment, the sum repaid, the term still to run, the repayments you were contracted to make and the time value of money.

Example only An owner has around $1,000,000 owing on interest only repayments with two years left on the fixed rate. On the day they ask, the wholesale rate for a two year term is around one percentage point lower than the wholesale rate on the day they fixed. One per cent of $1,000,000 is $10,000 a year, so two years comes to around $20,000. Brought back to today's dollars, the quote lands a little under that, say around $19,000. With six months left and the same rate gap, the figure would be around a quarter of that. These numbers are illustrative and are not any lender's formula.

Three things follow from the method. Your own margin over the wholesale rate is not usually part of the sum, because the lender is measuring its funding loss and not its lost profit, though that depends on the contract wording. The figure moves daily with the market, sometimes sharply. And a quote taken months ahead of a planned settlement tells you very little about the final number.

Do the home loan protections on break costs apply to commercial loans?

The home loan protections on break costs generally do not apply to commercial loans, because they come from consumer credit law and a loan to buy or refinance commercial property sits outside it. This is the part most owners get wrong, and it changes where you look for the answer.

On a regulated loan, the National Credit Code limits an early repayment charge to a reasonable estimate of what the lender loses. The AFCA factsheet on breaking a fixed rate loan lists commercial loans, commercial bill finance and market linked fixed rate small business loans among the loans that limit does not reach. For those, the factsheet says the test is the contract itself: the wording is read, and the amount charged or quoted is checked against what the lender was entitled to charge under the contract or at law. (No date is shown on the page. Read 19 November 2026.)

So on a commercial loan the question is not "is this fair compared with a home loan?" but what the contract allows. Before you fix, and again before you break, read the clause that deals with early repayment. Look for how the loss is defined, how much discretion the lender has in working it out, whether any gain is passed to you when rates have risen, and which other fees are payable on top. Whether a break cost was charged in line with your contract is a question for a solicitor.

Do unfair contract terms rules or the Banking Code help?

Unfair contract terms rules and the Banking Code of Practice can help some borrowers, but neither is a general cap on commercial break costs. The unfair contract terms rules may apply where the loan is a standard form small business contract, and the code applies only to lenders that subscribe to it and to customers who meet its small business definition. Whether your loan and your business fall inside either one is a legal question, so take the contract to a solicitor before relying on it.

What about commercial bill facilities and loans with a swap or hedge?

Commercial bill facilities and loans with a swap or hedge follow the same principle, but the cost can sit in a different place and sometimes in a different contract. What follows is in principle only.

On a bill facility the rate is typically set for each rollover period, and those periods are usually short. Repaying on a rollover date typically means there is no fixed rate left to break, while repaying part way through a period can produce a cost for the days remaining. The facility may also have a longer agreed term with its own fees for ending it early. Our post on the types of commercial property loans explains where bill facilities sit beside ordinary term loans.

Some larger loans stay on a floating rate while a separate swap or hedge fixes the borrower's cost. In that structure, repaying the loan does not by itself end the hedge. Closing the hedge out has its own value on the day, which can be a cost or a gain depending on where the market sits, and it is governed by its own documents. We do not advise on these products. Any swap or hedge is a question for your bank and your adviser, and it should be raised before a refinance is priced, not after.

How do you get a break cost quote, and how long does it hold?

You get a break cost quote by asking your current lender for one, and it holds only briefly because the wholesale rates behind it move every day. The rule is simple: ask for the quote in writing. A written quote is valid for a few business days, typically and varies by lender, and the amount is worked out again for the actual settlement date.

  1. Ask early. Request an indicative figure before you choose a new lender, so the cost of leaving is in the comparison from the start.
  2. Name the scenario. Give the date you expect to repay and whether it is a full payout or a part repayment.
  3. Ask again close to settlement. The final figure appears in the payout figure, recalculated for the day.

Ask for the quote in writing

  • The break cost amount and the date it was calculated
  • How long the figure holds
  • Separate figures for a full payout and a part repayment
  • Every other exit fee, listed on its own line
  • The contract clause the lender is relying on

Do not rely on

  • A verbal estimate over the phone
  • A figure that is more than a few days old
  • An online calculator built for home loans
  • One bundled total with no breakdown

In deals I've seen, the break cost quote is the item most often asked for too late, after a new lender has been chosen and a settlement date has been pencilled in. Getting it first costs nothing and can change the whole plan.

How can you reduce or avoid break costs?

You can reduce or avoid break costs mainly through timing, because the charge shrinks as the fixed period runs down and disappears when it ends. The options below depend on your contract, and none of them relies on guessing where rates go next.

  • Wait out the fixed period. Start the refinance early and set settlement for the day the fixed rate ends or shortly after. The fixed period is often shorter than the loan itself, a difference our commercial property loan term post explains.
  • Use prepayment allowances where the contract has them. Some fixed rate contracts allow a limited extra repayment each year without a charge. Many commercial contracts allow none, so check before you pay anything in.
  • Check which way rates have moved. If wholesale rates have risen since you fixed, the lender typically has little or no loss to recover. Ask for the quote anyway, because other fees still apply.
  • Ask what your current lender can do. A variation with the same lender may still count as a break, or the lender may be able to carry the fixed rate into the new arrangement. Our post on staying with the same lender or moving to a new one covers that choice.
  • Think about a sale before you list. Selling repays the loan just as a refinance does. Whether the fixed rate can move to another property or be dealt with another way depends on what the contract allows, so ask before the property goes to market.

A part repayment is worth pricing too. If the aim is to bring the balance down, the charge on the part repaid may be small enough to accept while the rest of the loan runs to the end of its fixed rate.

Is it worth paying a break cost to refinance?

Paying a break cost to refinance is worth it when what you gain over the months left on the fixed rate is more than the total cost of leaving. The cleanest way to test that is to work out the months to break even and set it beside the months left on the fixed rate.

Is the break cost worth paying? A break even check, example only (November 2026)
Step What to add up Example only
Break cost quote The written figure from your current lender for the planned settlement date Around $19,000
Other exit costs Discharge fee, any deferred establishment fee in the contract, legal costs. These are separate charges from the break cost Around $1,500
New loan costs Valuation, legal and establishment costs on the new loan, plus government registration fees Around $9,500
Saving per month The difference between what you pay now and what you would pay on the new loan Around $1,500
Months to break even Total cost of leaving divided by the saving per month Around $30,000 divided by $1,500, so around 20 months
Months left on the fixed rate The point at which the break cost would have been nil anyway 24 months

In that example the costs are recovered about four months before the fixed rate would have ended, which is a thin margin for the effort and risk involved. The other choice is to wait out the fixed period, pay no break cost at all and refinance then. Change the saving per month or the time left and the answer changes with it, which is why the sum has to be done on your own figures.

Rate alone rarely justifies breaking. The break cost and the rate saving are both driven by the same fall in rates, so one tends to take back much of the other. Breaking makes more sense when there is another reason behind it, such as releasing equity from the property, moving to a structure the current lender will not offer, a sale, or a meaningful difference in margin between lenders.

For the wider cost picture, see the cost sections of our guide on how to refinance a commercial property loan, the rates post for how pricing is set, and our list of refinance traps. How a break cost is treated for tax is a question for your accountant, and it is worth asking before you settle because it changes the real cost.

If you have a quote in hand and want a second set of eyes on the numbers, you can check eligibility for a refinance first, or browse the Property Lending Hub for related reading.

A break cost on a fixed rate commercial property loan is the lender's estimate of what it loses when the fixed rate ends early. The home loan rules do not carry over. On a commercial loan the amount comes down to the contract, the wholesale rate gap, the balance and the time left. Get the figure in writing, add the other exit and entry costs, and compare the months it takes to recover them with the months left on the fixed rate.

Key takeaway: get a written break cost quote before you choose a new lender, then decide whether to pay it or wait out the fixed period.

Frequently Asked Questions

You can restructure a commercial mortgage mid-term without big break costs when the loan is on a variable rate, when little time is left on the fixed rate, or when wholesale rates have risen since you fixed. On a fixed rate with years still to run, a restructure with the same lender can still count as a break, depending on what the contract allows. Ask for a written quote first, then compare an internal restructure with an external refinance.

AFCA can consider a complaint about break costs on a business loan where the borrower meets its small business rules and the lender is a member. For a loan outside the credit code it reads the contract and asks whether the amount charged or quoted is more than the lender was entitled to. Eligibility and claim limits apply, so check with AFCA or a solicitor before relying on it. Our business loan refinance post covers loans that are not secured on property.

Whether break costs on a commercial loan are tax deductible depends on what the loan funded and how the cost arises, so it is a question for your accountant and not for a broker. Get that answer before you settle, because it changes the real cost of refinancing. The lender's quote will not tell you the tax treatment.

A break cost quote is valid for a few business days, typically and varies by lender, because the wholesale rates behind it move daily. The final amount is worked out again for the settlement date and shows in the payout figure. Ask for a fresh quote close to settlement so the number you planned on is close to the number you pay.

There is typically little or no break cost if interest rates have gone up since you fixed, because the lender can lend the money out again at a higher wholesale rate and has no loss to recover. Whether any gain is passed back to you depends on what the contract allows, and commonly it is not. Administration or discharge fees can still apply when a fixed rate ends early.

Nick Lim

Nick Lim

Broker, Switchboard Finance

0483 980 567 / [email protected]

FBAA FBAA Accredited
Previous
Previous

Construction Finance in Brisbane: What Queensland Builders Need

Next
Next

Commercial Property Loan Annual Review: What Your Lender Re-Checks