Equipment Finance Rates: Why Some Equipment Costs More to Finance

Equipment Finance Rates: Why Some Equipment Costs More to Finance

Why equipment finance rates differ by equipment: how lenders tier primary, secondary and soft assets, and what you can change for a better rate.

Equipment Finance Rates in Australia | Switchboard Finance
Switchboard Finance Business Owners Hub

Equipment Finance Rates · Asset Tiers · Soft Assets

Equipment Finance Rates: Why Some Equipment Costs More to Finance

Most owners shop for an equipment finance rate as if it belongs to them. It only half does. The equipment sets the price as much as you do, which is why the same business can be quoted very differently on a truck, a laser cutter and a software licence.

Published 16 November 2026 / Reviewed 16 November 2026 / Nick Lim, FBAA Accredited Finance Broker / General information only

Quick Answer

There is no single equipment finance rate, because lenders price each deal on the equipment's resale market, age and seller as well as on your business, so vehicles and yellow goods usually price better than specialist equipment, software or fitout. Your business still matters, but the tier your equipment sits in often explains why one quote looks sharp and another does not. See how equipment finance is set up for business owners.

Also called: equipment finance interest rates, equipment loan rates, asset finance rates. They describe the same price; asset finance rates is the broader term and also covers vehicles.

Why do equipment finance rates differ from one piece of equipment to the next?

Equipment finance rates differ from one piece of equipment to the next because the lender is pricing two risks at once: your business, and what the equipment would fetch if it ever had to be sold. That is why there is no single equipment finance rate. A lender that expects to recover most of its money from a resale can price sharply. A lender looking at a custom machine or a software licence cannot.

Underneath every quote sits the lender's own cost of funds, which moves with the cash rate set by the Reserve Bank of Australia. A cash rate move shifts the base for everyone; it does not explain why two pieces of equipment price differently on the same day. What a move does to an actual quote is covered in our chattel mortgage rates guide.

To handle the second risk, lenders sort equipment into tiers. The labels differ between lenders, but the table below is where this commonly lands. If the products themselves are new to you, start with what asset finance is and who lends it.

How do lenders usually tier equipment, and what does each tier mean for rate, deposit and term? (November 2026)
Tier Typical equipment Resale market Rate, typically Deposit, typically Term, typically
Primary Cars, utes, vans, trucks, trailers and mainstream yellow goods Deep, with known second-hand values The sharpest pricing a lender offers for your business profile Often none needed, varies by lender Longer, often close to the working life of the asset
Secondary Specialist machinery, manufacturing, medical, printing and commercial equipment Thinner, with fewer buyers and values that are harder to confirm A loading above primary pricing, varies by lender Sometimes asked for, more often on used or privately sold gear Shorter, matched to how long the equipment holds its value
Soft Software, IT hardware, fitout, signage, installation and other soft costs Little or none, with little to repossess Usually higher, by an amount that varies by lender More often requested, or the deal leans on the business and guarantees Shorter, because the value fades quickly

What are primary, secondary and soft assets in equipment finance?

Primary, secondary and soft assets are the three groups lenders use to sort equipment by how easily they could sell it and recover the debt. The labels are internal and each lender draws the lines a little differently, but the sorting question is always the same: if this deal goes wrong, what is the equipment worth, and how quickly can it be sold?

Primary assets have a deep second-hand market: vehicles, trucks, trailers and mainstream yellow goods. Which earthmoving machines lenders favour is covered in the earthmoving equipment finance guide.

Secondary assets are real, movable plant and equipment with a narrower pool of buyers: CNC machines, printing presses, commercial laundry gear, diagnostic and dental equipment. Lenders fund them readily, but they carry more doubt about resale and price for it. Medical equipment is a common example, and the medical equipment finance rates insight covers how practices are priced.

Soft assets are items with little or nothing to sell afterwards: software, IT that dates quickly, fitout, signage and soft costs such as installation and training.

Which tier is your equipment in? A quick sort before you look at any quote:

Usually priced as primary

  • Cars, utes and vans with a deep second-hand market
  • Trucks and trailers
  • Mainstream yellow goods from established makers
  • Standard models with plenty of resale listings

Usually priced as soft

  • Software and licences
  • IT hardware that dates quickly
  • Fitout, shelving and signage fixed to the premises
  • Installation, delivery and training costs on their own

Anything between those two columns, from a used machining centre to a dental chair, is where secondary pricing sits.

Why do IT, software and fitout usually cost more to finance?

IT, software and fitout usually cost more to finance because there is little to repossess if the loan goes bad. A lender cannot pull a shopfit off the walls and sell it, and an old server or a software licence has almost no second-hand buyer.

So the lender leans on the business instead: trading history, cash flow and sometimes a director's guarantee or other security. Soft assets usually price higher, though by how much varies by lender, and terms are often shorter so the debt is paid down before the value is gone.

Mixed deals help. When soft costs ride alongside a strong primary or secondary asset, some lenders blend them into one agreement and the overall pricing improves. How technology purchases are structured is in the IT and office equipment finance guide, and built-in works are covered in the fitout finance guide.

How do equipment age, private sale, auction and imports change the rate?

Equipment age, private sale, auction and imports change the rate because each one adds doubt about what the lender is actually funding and what it is worth.

Age. Older equipment has less working life and less resale value left, so many lenders shorten the term or add a loading as age rises, and some set a maximum age the equipment can reach by the end of the term.

Private sale. No dealer stands behind the price or the title, so the lender wants a valuation, a clear PPSR search and proof the seller owns the equipment outright. The extra checks can come with a small loading.

Auction. The hammer price is not always market value and the condition is often unseen, so lenders may lend against a lower figure than you paid. Age limits, valuations and auction rules are set out in the used and aged equipment finance guide.

Imports. Buying from overseas can mean paying before the equipment lands, with less local resale evidence for the lender to lean on. Duty, GST and timing are covered in the importing equipment finance guide.

Does a chattel mortgage, finance lease or rental price the same equipment differently?

A chattel mortgage, finance lease or rental can price the same equipment differently, because each structure leaves the lender in a different position on the asset and with a different amount owing at the end.

With a chattel mortgage you own the equipment and the lender takes security over it. With a finance lease the lender owns it and you pay to use it, usually with a residual value due at the end. A balloon payment on a chattel mortgage works the same way: it lowers the repayments but leaves a lump sum owing, and the lender weighs that lump sum against what the equipment should be worth by then. A large residual on a secondary or soft asset is a risk lenders price for. Hire purchase sits between the two and is set out in the commercial hire purchase guide.

Rentals often quote a monthly figure rather than a rate, so compare the total you will pay and what you own at the end, not the headline. Interest-free dealer offers are usually built into the equipment price, and the equipment finance guide explains how to read them. For chattel mortgage rate levels, see the chattel mortgage rates guide.

What does your business add to the rate?

Your business adds the other half of the price: how long you have traded, how the business has been run and how cleanly you can show it. The equipment sets the price as much as you do, but you still set the rest.

  • Trading history. Around two years or more on the ABN is typically where many lenders open their sharper pricing. Newer businesses can still fund equipment, often with a deposit or a loading, and the new ABN equipment finance insight covers that path.
  • Credit conduct. A clean repayment history on business and personal debts supports better pricing; recent arrears or defaults push the deal toward specialist lenders.
  • Documents. Full financials let the lender price on proof. Where financials lag, low doc asset finance uses declarations, BAS or bank statements instead, typically with a loading.
  • A track record with similar equipment. A business that has already financed and paid out the same kind of gear is an easier read.

In practice, a strong business can pull a secondary asset close to primary pricing, but a soft asset stays a soft asset however good the file looks.

What can you change to get a better equipment finance rate, and what does not move it?

You can change the equipment you choose, the deposit, your documents and your timing to get a better equipment finance rate. What does not move the rate is anything that leaves the lender's risk where it was.

  • Choose equipment with a resale market. Between two machines that do the same job, the mainstream model usually finances on better terms.
  • Put a deposit on harder-to-resell gear. A deposit narrows the gap between the debt and the resale value, which matters most on secondary and soft assets.
  • Bundle soft costs with the main asset. Installation and software financed alongside the machine usually price better than the same items financed alone.
  • Have documents ready before you choose. Lodged returns, current BAS and a clean tax position let the lender price on the full picture.
  • Buy from a dealer, or have a valuation in hand. Certainty about title and value takes doubt out of the price.
What moves an equipment finance rate, and what does not? (November 2026)
Factor Moves the rate? Why
The equipment's tier Yes, often the biggest single factor The resale market decides how much the lender can recover
Age and condition Yes, typically Less working life left means less resale value
Who sells it: dealer, private seller or auction Usually Changes how sure the lender can be of title and value
Deposit Often, mostly on secondary and soft assets Narrows the gap between the debt and the resale value
Trading history and documents Yes The lender prices on proof of how the business performs
Balloon or residual size Sometimes, varies by lender A larger lump sum at the end raises the lender's exposure
Paying more for the same equipment No A higher price adds debt without adding resale value
Asking the same lender again with nothing changed No The risk the lender priced is still the same risk
An advertised headline rate No Headline rates assume a best-case asset and borrower; your deal is priced on its own facts

The useful conversation starts with the equipment, not the rate. If you have a quote in hand, check eligibility with the equipment details ready.

Equipment finance pricing is a two-part sum: the equipment and the business. Primary assets with deep resale markets price best, secondary assets carry a loading for thinner markets, and soft assets typically price higher because there is little to repossess. Age, the seller, the structure and your documents adjust the price from there, while paying more for the same item or asking the same lender twice does not.

Key takeaway: before chasing a lower rate, check which tier your equipment sits in, because that often explains a quote more than anything else.

Frequently Asked Questions

Equipment finance rates in Australia are not one published number, because each lender prices the deal on the equipment, its age and seller, and your business. Vehicles and mainstream machinery typically sit at the sharper end, while specialist equipment and soft assets carry a loading that varies by lender. The equipment finance guide explains how the product works end to end.

An equipment loan rate is often higher than a car loan rate because cars have a deep, well-priced second-hand market and most equipment does not. If the lender has to sell a specialist machine, it may take longer and recover less, so it prices for that doubt. What asset finance is sets out how lenders treat each kind of asset.

Equipment finance rates vary between quotes because each lender tiers the same equipment differently and weighs your business differently. One lender may treat a machine as secondary while another treats it as soft, and structure matters too, since a chattel mortgage and a lease on the same item can price apart. Check that quotes cover the same equipment, term and structure before comparing them.

A bigger deposit can lower an equipment finance rate, mostly on secondary and soft assets where the gap between the debt and the resale value worries the lender. On primary assets with deep resale markets, the effect is typically smaller and varies by lender. A deposit also reduces any residual value or lump sum left at the end.

Lenders usually charge more to finance software because there is nothing to repossess and resell if the loan goes wrong. Software financed on its own leans on the strength of the business, while software bundled with hardware or a machine often prices better. The IT and office equipment finance guide covers how those deals are put together.

Nick Lim

Nick Lim

Broker, Switchboard Finance

0483 980 567 / [email protected]

FBAA FBAA Accredited
Previous
Previous

Equipment Finance Pre-Approval: What It Locks In and What It Doesn't

Next
Next

Construction Equipment Finance: Funding Site Gear Beyond Earthmoving