Late Settlement in WA: Default Notices, Interest and What to Do Next

Late Settlement in WA: Default Notices, Interest and What to Do Next

Late settlement in WA: how a Joint Form default notice works, how default interest runs, who pays when Landgate or the lender is late, and what to do next.

Late Settlement Penalty in WA | Switchboard Finance
Switchboard Finance Property Lending Hub

Late Settlement WA · Default Notice · Joint Form

Late Settlement in WA: Default Notices, Interest and What to Do Next

A Perth buyer's lender misses the settlement booking, and the next morning the seller's settlement agent serves a default notice. From that point the Joint Form of General Conditions decides how long you have, what interest runs and what the seller can do if the window closes. Here is how each piece works, and the order to fix it in.

Published 17 November 2026 / Reviewed 17 November 2026 / Nick Lim, FBAA Accredited Finance Broker / General information only

Quick Answer

In Western Australia a buyer who misses settlement is usually in default under the Joint Form of General Conditions, owes interest on the unpaid balance, and can be served a default notice giving a fixed window before the seller may end the contract. The window is set by the current general conditions and any special conditions you signed, so the first job is to read the notice with your settlement agent and get a firm date from your lender. For how penalty interest works across every state, see our penalty interest guide.

Also called: settlement default, default notice, late settlement interest. WA practice says "settlement agent" where other states say conveyancer, and the contract calls the interest compensation when it runs against a late seller.

What happens if you miss settlement in Western Australia?

If you miss settlement in Western Australia, you are in default under the contract, but the contract does not end that day. Most WA sales are made on an Offer and Acceptance form that pulls in the Joint Form of General Conditions, prepared by the Law Society of Western Australia and REIWA. Those general conditions treat a missed date as a breach that the other side can act on, not as an automatic termination.

The pattern is simple to remember: default on the day, notice the next. In the opening scenario, the buyer is a self-employed electrician buying a small strata warehouse unit through his company. His lender's documents are not back in time to join the electronic workspace, settlement fails at the booked time, and the seller's settlement agent serves a default notice the following morning. Nothing about his deposit or the contract has changed yet. What has changed is that a clock is now running, and interest may start to build behind it.

Three things decide how this ends: what the notice requires and by when, how much interest has accrued by the day you settle, and whether you can produce the money before the window closes. The sections below take each in turn. For the national picture on penalty interest, including how it compares across states, read our penalty interest on late settlement guide. If your purchase is in New South Wales, the rules are different and are covered in our NSW delayed settlement post. We also cover Victoria, Queensland and South Australia, and late settlement on a commercial property.

How does a settlement default notice work in WA?

A settlement default notice in WA is a written notice from the party who is ready to settle, telling the party in default what the default is and how long they have to fix it. It is usually prepared and served by the other side's settlement agent or lawyer, following the notice rules in the contract. It is WA's working equivalent of the notice to complete used in other states.

At the time of writing, the 2022 edition of the Joint Form requires a default notice to give the defaulting party at least 10 business days to remedy the default, or any longer period the notice itself specifies. Older contracts may use an earlier edition, and special conditions can vary the period, so the Joint Form decides the window, check your contract. Business days exclude weekends and public holidays, which matters when a notice lands just before a long weekend.

The notice must name the default and require it to be fixed within that period. If the seller wants the right to end the contract when the window closes, the notice generally has to say so. A seller can also serve a further notice later, so fixing one notice does not rule out another if the date slips again. Whether a particular notice was validly given is a legal question, and it belongs with your settlement agent or lawyer, not with a broker.

What can the seller do when a WA default notice expires?

When a WA default notice expires without the default being fixed, the seller can usually choose to keep the contract alive and sue, or to terminate it. On termination, the general conditions typically allow the seller to forfeit the deposit up to a cap, resell the property and claim any shortfall on the resale as damages, and recover its legal costs of terminating. That is why the days inside the notice are worth more than anything you can do after it runs out. In short: fix it inside the notice.

Day one, notice served, deadline: what keeps the deal alive

  • Day one: your settlement agent tells the seller's side why settlement failed and when you expect to be ready
  • Notice served: you read it with your settlement agent the same day and diarise the last business day
  • Deadline: you settle, or you have a written extension, before the window closes

Day one, notice served, deadline: what loses it

  • Day one: silence, and an assumption that the lender will sort it
  • Notice served: counting calendar days instead of business days
  • Deadline: a verbal "we're nearly there" with no new booking and no written agreement

How is default interest worked out under the Joint Form?

Default interest under the Joint Form is worked out daily on the balance of the purchase price and the other money payable at settlement, at the rate the contract sets, from and including the original settlement date to the day settlement actually happens. The rate sits in the general conditions' definitions, and special conditions commonly replace it with a different figure, so the number on your contract is the one that counts.

The general conditions give a short grace period before interest becomes payable. At the time of writing, under the 2022 edition, interest is payable by a late buyer only if settlement is not completed within three business days after the settlement date. Once that grace period passes, though, the interest is calculated back to the original settlement date, not from the end of the grace period. So a buyer who settles on day two pays no default interest, and a buyer who settles a day later than that can pay for every day from the original date.

The seller also has to be ready, willing and able to settle and to say so by notice. If that notice comes within the grace period, interest runs from the settlement date. If it comes later, interest usually runs only from the day the notice was given. That detail matters when both sides were slow, and your settlement agent will check it before agreeing any amount.

What if the default interest amount is disputed in WA?

If the default interest amount is disputed in WA, the general conditions usually let settlement go ahead anyway, with the claimed amount held by a representative until the parties agree or the dispute is taken further. The party claiming interest has to set out its claim in writing shortly before settlement. A disagreement over the interest bill is not, by itself, a reason to let the default notice run out.

Can a WA buyer charge a late seller?

A WA buyer can usually charge a late seller under the Joint Form, because the general conditions mirror the buyer's obligation. If the delay is the seller's fault and settlement is not completed within the same short grace period, the seller allows the buyer compensation equal to interest at the contract rate, taken off the price at settlement. At the time of writing that grace period is three business days in the 2022 edition, though special conditions can change it.

The same condition applies in reverse: the buyer has to be ready, willing and able to settle and give notice of that, and the timing of that notice can change the day compensation starts. A late seller can also be served a default notice by the buyer. If the seller does not fix the default within the window, the buyer can usually keep the contract and sue, or terminate and have the deposit and other money paid back. Whether to do either is a decision for your settlement agent or lawyer, and the national rules on vendor delay are summarised in the penalty interest guide.

A common mistake is assuming a delay is the seller's when it is not. If your own lender, valuer or document signing held things up, the delay counts against you, even if the seller's side was also slow to respond.

What usually causes settlement delays in WA?

Settlement delays in WA usually come from one of three places: Landgate, the lender or the title. A transfer document that Landgate requisitions, a buyer's lender that has not issued documents or booked its funds, and a strata plan or new title that has not been created yet account for most of the files that slip. Electronic settlement failures on the day are less common but do happen.

Settlement in WA is handled by licensed settlement agents or by lawyers. Consumer Protection describes settlement agents as the people who facilitate the legal transfer of ownership, and licenses them under the Settlement Agents Act 1981. In a late file, the settlement agent runs the clock: they serve and receive the notices, track the business days and rebook the workspace.

Common WA settlement delays and who usually bears the cost (November 2026)
Cause Who usually bears it What usually happens next
Buyer's lender not ready The buyer. A lender's delay is treated as the buyer's delay under the contract. Default interest can start once the grace period passes, and the seller may serve a default notice.
Landgate requisition on the transfer Whichever side's document caused the requisition. Varies by contract and by the problem. The settlement agents correct the document and rebook. Check your contract before conceding interest.
Seller's mortgage discharge late The seller, as long as the buyer was ready, willing and able. The buyer can usually claim compensation equal to interest, taken off the price at settlement.
Strata plan or new title not issued Often neither side directly. The contract and special conditions usually set a new date. Settlement moves to a set period after the title issues. Check your contract and your loan approval expiry.
Electronic settlement failure on the day Varies by cause. A system outage is treated differently from a funding error. Settlement is usually rebooked quickly. Ask your settlement agent to record the cause in writing.

Sources: Consumer Protection WA, Settlement agents, last updated 1 January 2026. Read 17 November 2026. Contract mechanics from the 2022 Joint Form of General Conditions for the Sale of Land, read 17 November 2026. General information only.

A new title that has not issued can also push settlement past the date your loan approval expires, which turns a timing issue into a finance issue. That situation is covered in our long and delayed settlement guide. A lower than expected valuation is another frequent cause, and the valuation shortfall guide explains the options when the lender cuts the loan late.

What should you do in the days after a default notice?

In the days after a default notice, your aim is to settle, or to secure a written extension, before the last business day of the window. The order matters, because each step depends on what the one before it tells you.

  1. Read the notice with your settlement agent. Confirm which edition of the general conditions applies, what the notice requires, the last business day to remedy and whether it says the contract can be terminated.
  2. Ask your lender for a firm settlement date in writing. Not "soon": a date, and a list of anything still outstanding, such as signed documents, a valuation, insurance or a condition of approval.
  3. Ask the seller for an extension in writing. Through your settlement agent, propose a new date and confirm how interest will be handled. A verbal yes from the agent is not an extension.
  4. Line up short-term finance if your lender cannot meet the window. For a business purpose purchase, a caveat loan or second mortgage over other property you own can fund settlement while the main loan catches up. See caveat loans, our Perth caveat loan post and the Perth second mortgage post.
  5. Settle, or negotiate an exit. If none of the above lands inside the window, talk to your lawyer about a negotiated outcome before the notice expires, not after.

From the underwriter's seat, the question on a rescue loan is never only whether the property is good security. It is whether the exit strategy is real: which lender will refinance the short-term loan, on what approval, and by when. A buyer whose main lender has a credit approval and is only behind on documents has a far stronger file than one whose main loan has been declined. Short-term private money carries higher costs than a standard loan and only suits business purpose borrowing, so it needs an exit planned on day one.

If the purchase is commercial, the long-term loan that takes out the short-term funding is usually a commercial property loan, and it is worth starting that application in parallel rather than after settlement. Our bridging finance guide covers the other common bridge, and the Property Lending Hub brings the full set of property finance options together. For a WA purchase made before your current home sells, bridging loans in Perth and WA sets out the WA dates that decide the cost.

In Western Australia, a missed settlement is a default on the day and usually a notice the next. Under the current Joint Form, a default notice gives a fixed window of business days to fix the default, default interest builds daily once a short grace period passes and runs back to the original date, and a seller who is late can owe the buyer the same compensation. The window is where outcomes are decided: once it closes, the seller can usually terminate, keep the deposit up to a cap, resell and claim the shortfall. Read the notice with your settlement agent, get a firm date from your lender and put a fallback in place early. Fix it inside the notice.

Key takeaway: count the business days on the notice today, and if your lender cannot commit to a date inside them, speak to a broker about a business purpose bridge before the window closes.

Frequently Asked Questions

A settlement default notice in WA gives the party in default a set number of business days to fix the default, and at the time of writing the 2022 Joint Form of General Conditions sets a minimum of 10 business days, or any longer period the notice specifies. Older contract editions and special conditions can change this, so check your contract. Weekends and public holidays do not count. It works much like a notice to complete in other states.

Default interest under the Joint Form of General Conditions is calculated daily on the balance of the price and other money due at settlement, at the rate the contract sets, from and including the original settlement date to the day settlement happens. At the time of writing it is only payable once settlement slips past a grace period of three business days, but it then runs back to the original date. Special conditions often replace the rate. The national rules are in our penalty interest guide.

A buyer can usually charge the seller for late settlement in WA, because the Joint Form gives a buyer compensation equal to interest when the seller causes the delay and settlement passes the same short grace period. The compensation is taken off the price at settlement. The buyer must be ready, willing and able to settle and give notice of that. Your settlement agent or lawyer can confirm how your contract treats it.

Settlement delays in Western Australia are usually caused by Landgate requisitions on the transfer, a buyer's lender that is not ready, a seller's mortgage discharge running late, or a strata plan or new title that has not issued. Electronic settlement failures on the day are a smaller cause. A delayed title can also outlast your loan approval, which our long and delayed settlement guide covers.

Settlement in WA can be handled by either a licensed settlement agent or a lawyer, and most residential and many commercial sales use a settlement agent. Settlement agents are licensed by Consumer Protection under the Settlement Agents Act 1981. In a late file they serve and receive the notices and rebook the settlement, while contract disputes usually go to a lawyer.

Nick Lim

Nick Lim

Broker, Switchboard Finance

0483 980 567 / [email protected]

FBAA FBAA Accredited
Previous
Previous

Delayed Settlement Penalty Interest in Victoria: What Late Buyers Pay

Next
Next

Delayed Settlement in South Australia: Interest, Notices and Deposits