Roofing Business Loans: Finance for Roofers Through Storm Season

Roofing Business Loans: Finance for Roofers Through Storm Season

How roofers finance utes, roll formers and materials, and how lenders read storm season, insurance repair work and wet months in a roofing loan.

Roofing Finance and Business Loans | Switchboard Finance
Switchboard Finance Tradie Hub

Roofing Finance · Storm Season · Roofing Business Loans

Roofing Business Loans: Finance for Roofers Through Storm Season

A storm season can be a roofer's best year on the books and the hardest year to borrow against. The cheques arrive late, the next year rarely matches it, and a lender reads both. Here is how storm work, insurance jobs and wet months are read, and what to finance in which order.

Published 20 November 2026 / Reviewed 20 November 2026 / Nick Lim, FBAA Accredited Finance Broker / General information only

Quick Answer

Roofing businesses finance utes, trucks and roll formers with equipment finance or vehicle finance and use a business loan or line of credit for materials, and lenders want to see that storm and insurance work is steady enough across the year to carry repayments through wet and quiet months. A business loan is sized on the whole year, not the best month.

Also called: roofer loans, roofing contractor finance, finance for roofing businesses. This is finance for the roofing business itself, not consumer finance for a homeowner's roof repair.

How does storm season change a roofing business loan?

Storm season changes a roofing business loan because a lender reads your income across a full year, so one big run of hail and storm jobs can lift the numbers once and then make the following year look like a fall, even when nothing is wrong with the business. That is the tension most roofers hit: the year with the most money coming in is often the year a credit team trusts least.

A lender does not look at storm season on the books and assume it repeats. It asks how much of that turnover was a one-off event, how much was ordinary reroofing, gutter and new build work, and whether the ordinary work alone covers the repayments. The wider seasonal business loans picture applies, but roofing has a sharper version of it, because storms are not on a calendar.

Why can the year after a big storm look like a fall?

The year after a big storm looks like a fall because the comparison year was inflated, not because the business shrank. If your statements show a spike, then a return to normal, explain it before the lender asks: which months were storm jobs, which insurer or builder paid them, and what the base workload looks like without them. A wet month in the statements is expected in this trade. A wet month with no explanation and a large new repayment is what slows a file down.

The timing of when you ask for finance matters as much as how much you ask for:

  • Before the season: the cleanest time to set up a materials facility or finance gear, because the statements show the steady base and no unpaid insurance work is sitting in debtors.
  • During the rush: income looks strong but much of it is still owed. Lenders typically discount unpaid storm invoices until the money lands.
  • After the cheques clear: the strongest point to show the result, as long as you can separate the one-off storm income from the base.
  • In the wet months: borrowing is still possible, but expect the credit team to look hardest at how the business covered costs when rain stopped work.

Storm work: finance ready

  • Storm jobs listed by month and who paid them
  • Base reroof and new build work shown separately
  • Insurance work invoiced and mostly paid
  • BAS lodged on time through the rush
  • Materials bought on terms you can meet

Storm work: not ready yet

  • One spike in turnover with no explanation
  • Large insurer debts still unpaid
  • Supplier account stretched past its terms
  • GST from the rush not set aside
  • New loan sized on the best quarter

How do lenders read insurance repair work and builder subcontracts?

Lenders read insurance repair work as genuine income with a built-in delay, because a roofer usually waits for insurer approval before the money, and they read builder subcontracts as income that depends on someone else's payment cycle. Both are acceptable income. The question is how long your cash is tied up before it arrives.

On an insurance job the sequence typically runs from a make-safe, to a scope and quote, to an assessor's sign-off, to the repair, and only then to payment. Each step can add weeks, and in a large storm event the queue gets longer for everyone. Meanwhile you have paid for sheet, flashings and labour. The usual fix is a business line of credit sized to that gap, so the materials for the next job are not waiting on the last job's approval.

When you work as a subcontractor to a builder, the read is the same progress claim and retention read covered in our plumber business loans post, and the cash gap retentions create is set out in our post on how retention holdbacks create a cashflow gap. What a lender adds for roofers is concentration: if one builder or one insurer's repair program is most of your income, expect questions about what happens if that work stops.

Can you finance a roll former, scaffolding and edge protection?

You can finance a roll former, scaffolding and edge protection, usually through equipment finance or a chattel mortgage, either as separate contracts or bundled into one where the lender accepts mixed assets. Each asset is read differently, because a lender values it by what it would fetch if it had to be sold.

A roll former holds value and has a resale market, so it finances much like other plant. Scaffolding and edge protection are bought in many pieces, move between sites and are harder to identify, so some lenders prefer them bundled with a stronger asset or funded on the business's trading history rather than on the gear alone. A finance lease can suit gear you expect to replace often. GST on the purchase is worth planning for too; the GST treatment differs between a chattel mortgage and a lease. Materials hoists and cranes sit with the plant covered in our earthmoving equipment finance guide.

Which finance fits each part of a roofing business? (November 2026)
What you need Finance that typically fits What the lender looks at
Crew ute or tipper truck Chattel mortgage or vehicle finance Age and value of the vehicle, business use, trading history
Roll former Equipment finance, chattel mortgage or finance lease Resale value, supplier invoice, how much work it will run
Roll former, scaffolding and edge protection as a package One bundled equipment contract, where the lender accepts mixed assets Total value against the strongest single asset, varies by lender
Sheet, flashings and gutter stock Supplier trade account or a business line of credit How fast jobs are paid and whether the account is kept to terms
Labour and materials through a storm rush Line of credit or a short-term business loan Signed scopes, insurer approvals and the base workload

Does working at heights compliance matter to a lender or insurer?

Working at heights compliance matters most to your insurer and regulator, but a lender still notices it, because a stop-work notice, a serious claim or lapsed cover can cut income faster than any wet month. Under Safe Work Australia guidance, construction work with a risk of a fall of more than two metres is high risk construction work, and it needs a Safe Work Method Statement before it starts.

Safe Work Australia's working at heights guidance sets an order of control: work from the ground or a solid construction where possible, then prevent the fall with edge protection, scaffolding or guardrails, then use work positioning systems, and only then rely on fall arrest. That is why edge protection belongs in the finance plan rather than being treated as an afterthought: it is part of how the business keeps working. A lender may ask to see current public liability cover, and an insurer will ask how you manage heights.

Do roofers need to be licensed in Australia? Licensing for roof work is set by each state and territory, so the licence class you need depends on where you work, the type of roofing and the value of the job; your state licensing body is the place to confirm it. Lenders typically want licence and insurance details on file, alongside the documents in our tradie loan pack.

How do you grow after a storm season: a second crew, a ute or commercial work?

You grow after a storm season in the order your statements can support, because a second crew after a big season only pays off if the extra work survives into the following year. Most roofers fund the vehicle and gear for the new crew first, add a materials line once larger jobs are booked, and take on commercial or builder work when the pipeline is steady.

In practice the answer is usually a staged plan rather than one large loan: vehicle finance for the second crew ute, equipment finance for its gear, and a facility that grows with signed work. Commercial roofing brings larger contracts but also longer payment terms and retentions, so it changes how much working cash the business needs. For the full range of options, the business loans guide sets out how each product is assessed, and the equipment finance guide covers the asset side.

What should a roofer finance first after a storm season? (November 2026)
Step What it funds Finance that typically fits Signal the lender wants
1. Second crew vehicle Ute or truck with racks and tie-downs Vehicle finance or chattel mortgage Base work, not storm work, covering the repayment
2. Gear for the crew Harnesses, edge protection, tools, a second roll former if needed Equipment finance, bundled or separate Booked jobs for the new crew
3. Materials line Sheet and flashings for larger jobs Business line of credit Supplier account kept to terms through the rush
4. Commercial or builder work Longer payment terms and retentions Business loan or larger facility A spread of clients, not one builder or insurer

Can a roofer get finance without two years of tax returns?

A roofer can often get finance without two years of tax returns through low doc lending, where BAS, business bank statements and an accountant's letter stand in for full financials, typically at a higher rate or a lower loan amount than full doc lending, and it varies by lender. This suits a roofer whose returns are late because the storm season left no time for paperwork, or whose last return does not reflect the current business.

What helps most is a tidy, recent file. Before you ask for finance:

  1. Lodge your BAS. Up-to-date BAS is the core of a low doc file.
  2. Pull six to twelve months of business statements. Typically the lender wants enough to see both storm months and quiet ones.
  3. Mark the storm work. A one-page note of which deposits were storm or insurance jobs saves a round of questions.
  4. Get an accountant's letter if you can. An accountant letter confirming income and ABN history strengthens the file.
  5. Gather licence and insurance details. The Tradie Hub collects the trade-specific guides, and you can check eligibility before a lender sees anything.

For a wider view of how lenders treat trade businesses, our guide to business loans for tradies covers the common products side by side.

A roofing business borrows against a year, not a storm. Lenders accept insurance repair work and builder subcontracts as real income, but they discount what is still unpaid, look hard at concentration in one builder or insurer, and read the year after a big season against the base workload. Utes, roll formers, scaffolding and edge protection finance well as assets; materials and the insurance approval gap suit a line of credit. Growth after a big season works best in stages, each one backed by booked work rather than last season's peak.

Key takeaway: separate your storm income from your base work before you ask for finance, and size any new loan on the base.

Frequently Asked Questions

Whether a roofer needs to be licensed in Australia depends on the state or territory, the type of roof work and the value of the job, because each state sets its own licence classes. Your state licensing body can confirm which class applies to you. Lenders typically ask for licence and insurance details, which sit alongside the documents in our tradie loan pack.

A roofing business can get vehicle finance for utes and trucks, equipment finance or a chattel mortgage for a roll former and access gear, and a business loan or line of credit for materials and storm-season labour. Most roofers use a mix, matched to what each dollar buys. The business loans page covers the unsecured and secured options.

A roofer can get a loan during the wet season, because lenders assess the full run of bank statements rather than only the month you apply in. A wet month in the statements is expected in roofing. What helps is showing how the business covered costs while rain stopped work, and sizing the loan on a typical month rather than the best one.

Insurer approvals affect a roofer's cash flow because the roofer usually buys materials and pays labour before the insurer signs off and pays, so cash is tied up for weeks on every insurance job. In a large storm event that delay can stretch further. A business line of credit sized to the approval gap is a common way to keep the next job moving.

You can finance a roll former for your roofing business, usually through equipment finance, a chattel mortgage or a finance lease, with the machine itself as security. Because a roll former has a resale market, it typically finances more easily than loose gear like scaffolding. Lenders look at the supplier invoice, the machine's value and how much work it will run.

Nick Lim

Nick Lim

Broker, Switchboard Finance

0483 980 567 / [email protected]

FBAA FBAA Accredited
Previous
Previous

WIP Reports for Builders: What Lenders and Bond Providers Read

Next
Next

Bank Guarantee for a Commercial Lease: How Tenants Get One